Stock OEM VW/ Audi advertised numbers
🎉 Up to 70% Off Selected ItemsShop Sale
HPA VW & Audi 3.0L TFSI EA837 (B8/8.5 S4 A4 A5 Q5, C7 A6/A6L, 4G A7, D4 A8/A8L)
FEATURES
- Engineered on our Superflow AWD dyno
- Industry leading low-to-mid range drivability
- Able to adjust timing and fuel for different fuel grades. No "switchable" program needed
- Volkswagen factory safety limiters retained
- Rigorously tested under all types of driving conditions
- All speed limiters removed
- Overrun crackles available upon request
- Direct flashing from home via OBD2 port
- Access to HP Tuners VCM Scanner for a feature-rich OBDII Scanning & Diagnostic Software
- Standalone data logging
EMISSIONS DISCLAIMER
- This product is intended for racing purposes and for use on non-highway registered vehicles.
- By purchasing this product, you acknowledge that it is intended solely for racing applications and vehicles that are not registered for highway use. It is not approved for use on vehicles operated on public roads or highways.
- Due to federal and state emissions regulations, the HP Tuners MPVI3 dongle cannot be used to disable, delete, or permanently turn off the Check Engine Light (CEL) related to emissions-related components or diagnostics. Attempting to do so may violate emissions laws and result in legal or regulatory penalties.
SUPPORTING HARDWARE
|
STAGE |
REQUIRED MODIFICATIONS |
RECOMMENDED MODIFICATIONS |
| Stage 1 | None |
Intake Upgraded DSG/ZF8 Software |
| Stage 2 + |
SuperCharger Pulley Upgrade Upgraded DSG/ZF8 Software |
Upgraded HPFP |
PERFORMANCE
Results reported as measured on our Superflow Dyno. Dyno results will vary depending on local conditions, fuel quality, dyno brand, and correction factors. Our Superflow dyno is calibrated to read within 1-2% of manufacturer ratings and reads 10-15% less than the most popular Dynojets on the market.
| STAGE | FUEL TYPE | HORSEPOWER (HP) | TORQUE (FT-LBS) |
|
|
|
333 HP |
325 FT-LBS |
|
Stock OEM HPA Superflow Dyno |
93 AKI / 98 RON |
425 HP |
410 FT-LBS |
|
Stage 1 |
93 AKI / 98 RON |
397 HP |
362 FT-LBS |
|
Stage 2+ |
93 AKI / 98 RON |
477 HP |
445 FT-LBS |
FITMENT GUIDE
| Make | Model | Year | Generation |
| Audi | A4 | 2008-2018 | B8/B8.5 |
| Audi | A5 | 2008-2018 | B8/B8.5 |
| Audi | A6/A6L | 2011-2018 | C7 |
| Audi | A7 |
2010-2011 2014-2017 |
4G |
| Audi | A8/A8L |
2010-2011 2013-2014 |
D4 |
| Audi | S4 | 2009-2016 | B8/B8.5 |
| Audi | S5 | 2009-2017 | B8/B8.5 |
| Audi | Q5 |
2012-2013 2015-2017 |
8RB |
Select Select Vehicle *See Fitment Chart for Vehicle Years*
Select Flashing Tool Required
Select STAGE
From $420.00
Original: $1,200.00
-65%HPA VW & Audi 3.0L TFSI EA837 (B8/8.5 S4 A4 A5 Q5, C7 A6/A6L, 4G A7, D4 A8/A8L)—
$1,200.00
$420.00More Images
HPA VW & Audi 3.0L TFSI EA837 (B8/8.5 S4 A4 A5 Q5, C7 A6/A6L, 4G A7, D4 A8/A8L)
FEATURES
- Engineered on our Superflow AWD dyno
- Industry leading low-to-mid range drivability
- Able to adjust timing and fuel for different fuel grades. No "switchable" program needed
- Volkswagen factory safety limiters retained
- Rigorously tested under all types of driving conditions
- All speed limiters removed
- Overrun crackles available upon request
- Direct flashing from home via OBD2 port
- Access to HP Tuners VCM Scanner for a feature-rich OBDII Scanning & Diagnostic Software
- Standalone data logging
EMISSIONS DISCLAIMER
- This product is intended for racing purposes and for use on non-highway registered vehicles.
- By purchasing this product, you acknowledge that it is intended solely for racing applications and vehicles that are not registered for highway use. It is not approved for use on vehicles operated on public roads or highways.
- Due to federal and state emissions regulations, the HP Tuners MPVI3 dongle cannot be used to disable, delete, or permanently turn off the Check Engine Light (CEL) related to emissions-related components or diagnostics. Attempting to do so may violate emissions laws and result in legal or regulatory penalties.
SUPPORTING HARDWARE
|
STAGE |
REQUIRED MODIFICATIONS |
RECOMMENDED MODIFICATIONS |
| Stage 1 | None |
Intake Upgraded DSG/ZF8 Software |
| Stage 2 + |
SuperCharger Pulley Upgrade Upgraded DSG/ZF8 Software |
Upgraded HPFP |
PERFORMANCE
Results reported as measured on our Superflow Dyno. Dyno results will vary depending on local conditions, fuel quality, dyno brand, and correction factors. Our Superflow dyno is calibrated to read within 1-2% of manufacturer ratings and reads 10-15% less than the most popular Dynojets on the market.
| STAGE | FUEL TYPE | HORSEPOWER (HP) | TORQUE (FT-LBS) |
|
Stock OEM VW/ Audi advertised numbers |
|
333 HP |
325 FT-LBS |
|
Stock OEM HPA Superflow Dyno |
93 AKI / 98 RON |
425 HP |
410 FT-LBS |
|
Stage 1 |
93 AKI / 98 RON |
397 HP |
362 FT-LBS |
|
Stage 2+ |
93 AKI / 98 RON |
477 HP |
445 FT-LBS |
FITMENT GUIDE
| Make | Model | Year | Generation |
| Audi | A4 | 2008-2018 | B8/B8.5 |
| Audi | A5 | 2008-2018 | B8/B8.5 |
| Audi | A6/A6L | 2011-2018 | C7 |
| Audi | A7 |
2010-2011 2014-2017 |
4G |
| Audi | A8/A8L |
2010-2011 2013-2014 |
D4 |
| Audi | S4 | 2009-2016 | B8/B8.5 |
| Audi | S5 | 2009-2017 | B8/B8.5 |
| Audi | Q5 |
2012-2013 2015-2017 |
8RB |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
FEATURES
- Engineered on our Superflow AWD dyno
- Industry leading low-to-mid range drivability
- Able to adjust timing and fuel for different fuel grades. No "switchable" program needed
- Volkswagen factory safety limiters retained
- Rigorously tested under all types of driving conditions
- All speed limiters removed
- Overrun crackles available upon request
- Direct flashing from home via OBD2 port
- Access to HP Tuners VCM Scanner for a feature-rich OBDII Scanning & Diagnostic Software
- Standalone data logging
EMISSIONS DISCLAIMER
- This product is intended for racing purposes and for use on non-highway registered vehicles.
- By purchasing this product, you acknowledge that it is intended solely for racing applications and vehicles that are not registered for highway use. It is not approved for use on vehicles operated on public roads or highways.
- Due to federal and state emissions regulations, the HP Tuners MPVI3 dongle cannot be used to disable, delete, or permanently turn off the Check Engine Light (CEL) related to emissions-related components or diagnostics. Attempting to do so may violate emissions laws and result in legal or regulatory penalties.
SUPPORTING HARDWARE
|
STAGE |
REQUIRED MODIFICATIONS |
RECOMMENDED MODIFICATIONS |
| Stage 1 | None |
Intake Upgraded DSG/ZF8 Software |
| Stage 2 + |
SuperCharger Pulley Upgrade Upgraded DSG/ZF8 Software |
Upgraded HPFP |
PERFORMANCE
Results reported as measured on our Superflow Dyno. Dyno results will vary depending on local conditions, fuel quality, dyno brand, and correction factors. Our Superflow dyno is calibrated to read within 1-2% of manufacturer ratings and reads 10-15% less than the most popular Dynojets on the market.
| STAGE | FUEL TYPE | HORSEPOWER (HP) | TORQUE (FT-LBS) |
|
Stock OEM VW/ Audi advertised numbers |
|
333 HP |
325 FT-LBS |
|
Stock OEM HPA Superflow Dyno |
93 AKI / 98 RON |
425 HP |
410 FT-LBS |
|
Stage 1 |
93 AKI / 98 RON |
397 HP |
362 FT-LBS |
|
Stage 2+ |
93 AKI / 98 RON |
477 HP |
445 FT-LBS |
FITMENT GUIDE
| Make | Model | Year | Generation |
| Audi | A4 | 2008-2018 | B8/B8.5 |
| Audi | A5 | 2008-2018 | B8/B8.5 |
| Audi | A6/A6L | 2011-2018 | C7 |
| Audi | A7 |
2010-2011 2014-2017 |
4G |
| Audi | A8/A8L |
2010-2011 2013-2014 |
D4 |
| Audi | S4 | 2009-2016 | B8/B8.5 |
| Audi | S5 | 2009-2017 | B8/B8.5 |
| Audi | Q5 |
2012-2013 2015-2017 |
8RB |
